Abstract
The nitrogen content and solidification structure of the 1Mn18Cr18N ingots produced by the customized laboratory‐scale vacuum induction melting furnace and the pressure electroslag remelting furnace (PESR) with novel composite electrode under different pressure and the same power consumption are compared and studied. The results show that there are perfectly uniform radial chromium and nitrogen profiles during the PESR process. The nitrogen uptake reaction in the PESR process with composite electrode takes place on the liquid metal film on the electrode. Nitrogen uptake could be improved by increasing the nitrogen partial pressure. In addition, the basin depth at a pressure of 0.1 and 1.22 MPa is about 41 and 38 mm, the angle of the grains with respect to the vertical axis is 35° and 31°, respectively. The flat metal basin profile resulted from the thermal resistance at the slag–mold interface decreasing with increasing pressure. Primary and secondary dendritic arm spacing (PDAS and SDAS) variations exhibit an increasing and subsequently decreasing the trend as they move further away from the center in a horizontal direction. Both PDAS and SDAS decrease with increasing pressure from 0.1 to 1.22 MPa.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
