Application of an Improved State Feedback Control in the Selective Catalytic Reduction Denitrification Systems of Coal Power Units Under Variable Load Conditions

Abstract

Selective catalytic reduction (SCR) flue gas denitrification systems are inherently complex, typically embodying characteristics of non-linearity, significant time delays, and susceptibility to multiple disturbances. In the context of coal power units engaging in deep load cycling and rapid frequency adjustment, conventional proportional-integral-derivative (PID) control struggles to meet the demands of effective control. This study introduces a control strategy that incorporates a “state observer + Linear Quadratic Regulator (LQR) state feedback + Improved Quantum Genetic Algorithm (IQGA) optimized PID”. Initially, local linear mathematical models of an SCR denitrification system at 340 MW, 450 MW, and 540 MW loads were used to design state observer and LQR state feedback control parameters for each operational condition. At a single load point, the IQGA was employed to optimize the outer loop PID parameters, followed by simulation experiments of load increases and decreases between 340 MW and 540 MW. The results demonstrated that, compared to two other strategies, the proposed approach reduced the overshoot by a minimum of 1.5% and shortened the adjustment time by 31.7% under conditions of step disturbances and internal perturbations. Throughout variable operational conditions, the strategy consistently exhibited minimal output fluctuations, rapid adjustment capabilities, strong disturbance rejection, and robust stability. This algorithm proves to be an effective method for controlling NOx concentrations, offering insights for precise ammonia injection control in future applications.