Abstract
ABSTRACTIn this article, a method for the detection of wave field parameters from synthetic aperture radar (SAR) imagery in the fetch-limited Baltic Sea is presented. Over the Baltic Sea region, common southwest (SW) and west (W) winds induce steep waves with shorter wavelengths compared with ocean waves. Thus, with the use of previous SAR sensors (e.g. ENVISAT/ASAR), it was not possible to detect individual waves and retrieve image wave number spectra. Since the year 2007, when TerraSAR-X (TS-X) reached its orbit, high spatial resolution data is available for measuring the sea-state parameters: the individual waves up to 30 m wavelength and their refraction can be distinguished. The main objective of this work was to demonstrate the capability of detecting wave field parameter from (TS-X) imagery in the Baltic Sea. The wave field parameters obtained from the SAR imagery were compared with in situ measurements and the Simulating WAves Nearshore (SWAN) wave model. The comparison of SAR-based wave field information with buoy measurements showed high agreement in case of wave propagation direction (r = 0.95) and wavelength (r = 0.83). A significant correlation is also seen between SWAN- and SAR-derived wave propagation direction (r = 0.87) and wavelengths (r = 0.91). With the case studies, it is shown that SAR data enables one to detect land shadow effects and small-scale wave field variations in the coastal zone. It was shown that SAR data is also valuable for improving and interpreting the wave model results. In consequence of common slanting fetch cases over the Baltic Sea region, it was demonstrated that the peak wave directions differ from the mean wind directions up to 43°.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call