Abstract
The scope of both existing standardized methods for the determination of quasistatic mode II interlaminar fracture toughness, ASTM D7905/D7905M – 14 and ISO 15114:2014, is limited to testing laminates with unidirectional reinforcement. Furthermore the precision round-robins conducted as a part of the development of these procedures focused mainly on laminated with epoxy resin matrix. This paper compares the testing methods for quasistatic mode II interlaminar fracture toughness with the focus on their applicability to testing thermoplastic laminates with woven fabric reinforcement.Two standardized testing methods were used to determine the mode II fracture toughness of a laminate made of polyether ether ketone matrix reinforced with T300 carbon fibers in the form of 5 harness satin woven fabric. The testing methods were compared in terms of the set-up complexity, testing efficiency, the data reduction methods, the type of properties determined, the results scatter and the applicability to testing thermoplastic-based laminates with woven fabric reinforcement. The methods produced similar and consistent results. Both of them can be successfully applied to testing thermoplastic laminates with woven fabric reinforcement after including modifications discussed in the paper.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call