Abstract
Abstract: To design a single element microstrip patch antenna at a frequency of 4 GHz. A uniform planar array with 4 patch elements is designed. A non uniform planar array is designed to overcome the mutual coupling effect. Simulation of the designed uniform planar array and non uniform planar array antenna array is performed on HFSS tools. A single microstrip feed patch antenna element is designed at a frequency of 4 GHz. The substrate material used is Rogers 6002. A 2*2 array is designed by using 4 similar patch elements. The proposed model has dimensions of the substrate as 58mm x 68mm, the dimensions of the patch is 20mm x 22mm. For the proposed model slots are added to each patch with the dimensions 5mm x 1mm. The substrate material used is FR4 epoxy. It is further improved by changing the dielectric material variations, slot arm length variations, slot arm thickness variations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal for Research in Applied Science and Engineering Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.