Abstract
Densification behavior of (Al1−xCrx)2O3 (where, x=0, 0.1, 0.3, 0.5) compacts in the temperature range 1000–1700°C under reducing condition were studied. Up to 1300°C, densification behavior followed the normal trend, i.e., bulk density increases with increase in Cr2O3 content. Anomaly in the densification behavior was observed from 1400°C onwards. Al2O3 samples showed high densification; but the addition of 10mol% Cr2O3 resulted in a sharp decrease in densification; while further Cr2O3 addition showed a steady rise in densification. XRD studies revealed the solid solution formation starts at 1400°C. A broad endothermic peak at around 1400°C in DTA thermogram corresponds to the formation of solid solution which actually absorbs extra heat energy resulting less dense Al2O3–Cr2O3 compacts. The average grain size of sintered Al2O3–Cr2O3 samples increases with increase in Cr2O3 content.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.