Abstract

Radiation tolerance of Cu(In,Ga)Se2 (CIGS) solar cells has been investigated using high-fluence proton beam irradiation for application to devices in extremely-high-radiation environments. CIGS solar cells deteriorated after high-energy proton irradiation with non-ionizing energy loss of 1 × 1016 MeVneq cm−2, however, the CIGS solar cells could generate power after high-fluence irradiation. The ideality factors increased from 1.3 to 2.0, and series resistance increased, indicating that the concentration of recombination centers increased in CIGS layers. After heat-light annealing, the conversion efficiencies gradually recovered, and the recombination centers were confirmed to be partly passivated by annealing at 90 °C. The short-circuit currents for 10 μm thick CIGS solar cells were recovered by dark annealing in the same manner as for 2 μm thick CIGS solar cells. Dark annealing on irradiated CIGS solar cells has beneficial effects on passivate the recombination centers, even using thicker CIGS layers.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.