Abstract

Premature debonding of fiber-reinforced polymer (FRP) sheets commonly occurs in purely bonded reinforced concrete (RC) beams. A hybrid strengthening method for narrow FRP-strengthened RC beams has been proposed to solve this problem. Experimental results have verified the effectiveness of the novel strengthening system in preventing the end debonding and impeding the intermediate debonding of the FRP sheet. However, the mechanism of its strengthening efficiency has not been studied deeply enough. Therefore, this paper developed a non-linear three-dimensional finite element (FE) model to study the flexural behavior of the FRP-strengthened narrow RC beams hybrid anchored with end self-locking system. The FE model was verified against the available experimental studies and showed good agreement, with a R2 of 0.97. Based on the verified model, parametric studies were performed to study further the influences of four major factors: FRP sheet length, steel rebar ratio, concrete compressive strength, and number of FRP sheet layers. The efficacy of hybrid strengthened beams was reduced with longer FRP bond lengths and higher steel rebar ratios. Conversely, increasing concrete compressive strength and FRP sheet layers to a certain degree enhanced the efficacy. Finally, an analytical model to predict the load-deflection curve of the beam was proposed.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call