Abstract
The majority of the existing literature on the lateral stability of castellated beams deals with experimental and/or numerical studies. This paper presents a comprehensive analytical study of the lateral–torsional buckling of simply supported castellated beams subject to pure bending and/or a uniformly distributed load. Using the principle of total potential energy, analytical expressions for the critical buckling moments and loads are derived and applied for various beam lengths. The three different locations of the applied load are used: At the top flange, shear center and bottom flange. The results show that the influence of web openings on the critical buckling moments and loads are mainly due to the reduction of the torsional constant caused by the web openings. Web shear effects and web shear buckling become important only when the beam is short and the flange is wide. The critical moments and loads will be overestimated or underestimated if the full or reduced section properties are used. The accurate critical moment or load should be calculated based on the average torsional constant of the full and reduced sections rather than simply taking the average of the critical moments or loads calculated from the full and reduced section properties. The present analytical solutions are verified using 3D finite element analysis results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Structural Stability and Dynamics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.