Abstract
Laser Shock Processing (LSP) is increasingly applied as an effective technology for the improvement mechanical and surface properties of metallic materials for different types of components, mostly as a means of enhancement of their fatigue life behavior. As reported in previous contributions, a main effect resulting from the application of the LSP technique consists in the generation of relatively deep compression residual stresses fields allowing an improved mechanical behavior. In this paper, the special case of Ti-6Al-4 V alloy is considered with specific consideration of the microstructural changes and residual stresses fields justifying those macroscopic effects. In particular, the effect of the application of different typical LSP intensities on the microstructure and residual stresses fields introduced in this material and their possible correlation to the associated surface effects are analyzed. Emphasis is placed on the study of the thermal stability of these fields after an aging heat treatment at typical high temperature working conditions. The results show that, according to expectations, a certain level of residual stresses and dislocation density remains after in-work thermal aging. The combination of different material characterization techniques has made possible to obtain a correlated set of results highlighting the complementarity of different scale approaches from surface (X-ray) to bulk (neutrons) methods. A model based on the evolution of immobile dislocation density is proposed to rationalize the distribution of dislocation densities, pointing out that plastic deformation is retained. The results clearly show such material improvement stability under typical heavy-duty conditions, thus endorsing the use of the LSP for Ti-6Al-4 V as a suitable technology for industrial applications in relatively high temperature conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have