Analysis of the optimization of the construction process of ecological brick compared to ceramic brick

Abstract

The brick is composed of water, soil and cement, having an easy manufacturing process, with short construction and low cost is not subjected to burning is manufactured by a very different process from ceramic blocks, the same goes through a hydraulic press. This type of brick has characteristics that provide quality, sustainability, beauty, and above all savings in the total cost of the work. When used in construction are eliminated some steps and the execution time in the work. A block wall or ceramic brick will need roughcast, sketch, plaster, seamer and painting, besides considering the cost of these materials can not forget the labor that corresponds to an average 50% of the value of the work. But the great advantage over the other bricks is its construction system, once raised the wall this is ready, does not need finishing, and the pillar structure and beams are ready with it. Electrical and Hydraulic Installations are easily installed without the need for breakage and waste. These bricks do not require the use of mortars for laying, coatings such as plastering for regularization and finishing of walls, in addition to accelerating the work with their fittings that facilitate the alignment and plumb of the walls. The objective of this work is present through a literature review of optimization processes that involve the ecological brick. in addition to accelerating the work with their fittings that facilitate the alignment and plumb of the walls. The objective of this work is present through a literature re-view of optimization processes that involve the ecological brick. in addition to accelerating the work with their fittings that facilitate the alignment and plumb of the walls. The objective of this work is present through a literature review of optimization processes that involve the ecological brick.