Abstract
ZrB2—20 vol.% SiC ceramics with additional 20 vol.% short carbon fibers were developed to promote graceful failure using hot-pressing technique. The influence of short carbon fiber on the strength, and modulus of composite was analyzed and estimated using a modified rule of mixtures. The calculation results showed that a little decrease in flexural strength from 502 to 445 MPa and elastic modulus from 414 to 322 GPa was due to the lower elastic modulus of short carbon fiber. An apparent increase in fracture toughness from 2.0 to 6.56 MPa m1/2 was obtained with the addition of short carbon fiber. And the fracture toughness was analyzed and calculated based on the toughening mechanisms of crack deflection, fiber pullout, and crack bridging. Calculated results were in good agreement with experimental results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.