Analysis of the Effect of Fiber Orientation on Mechanical and Elastic Characteristics at Axial Stresses of GFRP Used in Wind Turbine Blades.

Abstract

Due to its physical and mechanical properties, glass-fiber-reinforced polymer (GFRP) is utilized in wind turbine blades. The loads given to the blades of wind turbines, particularly those operating offshore, are relatively significant. In addition to the typical static stresses, there are also large dynamic stresses, which are mostly induced by wind-direction changes. When the maximum stresses resulting from fatigue loading change direction, the reinforcing directions of the material used to manufacture the wind turbine blades must also be considered. In this study, sandwich-reinforced GFRP materials were subjected to tensile testing in three directions. The parameters of the stress-strain curve were identified and identified based on the three orientations in which samples were cut from the original plate. Strain gauge sensors were utilized to establish the three-dimensional elasticity of a material. After a fracture was created by tensile stress, SEM images were taken to highlight the fracture's characteristics. Using finite element analyses, the stress-strain directions were determined. In accordance to the three orientations and the various reinforcements used, it was established that the wind turbine blades are operational.