Analysis of the characteristics of valveless piezoelectric pump with crescent dune bluff body.

Abstract

To improve the output flow characteristics of the piezoelectric pump in one direction, a new valveless piezoelectric pump with a crescent dune bluff body has been proposed. The pump can achieve low damage to the active substance on the premise that the active cell can guarantee the transport volume. By comparing with the hemispherically deficient and imitated meniscus resistance fluid, the barchan dune resistance fluid which can effectively improve the unidirectional output of the piezoelectric pump is obtained. Combined with the pump theoretical flow calculation formula, these influencing parameters, the degree of inclination, the sand ridge radius and the order of the crescent dune were analyzed. Finally, an experimental prototype of a valveless piezoelectric pump has been fabricated by 3D printing technology, and the pump flow test is being conducted. The relationship between frequency, voltage and output flow has been obtained. The test results show that with a dune inclination of 37.5, a sand ridge radius of 6.75 mm and a dune order of 4, the flow rate of the piezoelectric pump is best at 194.7 mL/min. The experimental results agree with the simulation results, showing the effectiveness of the valveless piezoelectric pump structure.