Abstract
Steering knuckle is the most stress sustaining and critical component of All Terrain Vehicle (ATV). Steering knuckle is the pivot point of the steering and suspension system, which allows the front wheels to turn and also allow the movement of suspension arms motion. The light weight and high strength component is always in demanding for racecar application. Lightweight and optimized design of steering knuckle is proposed to use for a BAJA SAE INDIA off road racecar. Due to the failure in knuckle in terrain vehicle after some instances, it has to be modified for better performance. The 3D CAD model created by using CATIA V5 and static as well as model analysis carried out in ANSYS 12 to understand its behavior under operating conditions. All test for frame was carried out on aluminum alloys 6061-T6 & for spindle EN8. The paper discusses the FE analysis of existing and modified Steering Knuckle.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
