Abstract
An analytical model is proposed for studying the formation of shear bands in metallic glasses over a wide range of size scales when subjected to plane strain bending. The model is based on elasto-plastic beam bending and the evolution of shear offset in shear bands. The spacing of shear bands is assumed to be governed by a scaling law depending on a non-dimensional material parameter which is determined from experiments. The macroscopic inelastic deformation due to bending is thought to be accommodated by slip along shear bands. The model is based on comparison of the energy dissipated along shear bands with the macroscopic dissipation obtained from the elasto-plastic theory of beam bending. The model is able to capture the following experimentally-observed scaling laws: (i) for a given thickness, the shear band spacing varies linearly with curvature; (ii) for a given curvature, the shear band offset varies as the square of the thickness; (iii) the shear band spacing varies linearly with the thickness; and (iv) failure strain (bend ductility) decreases with increasing thickness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.