Abstract
The stratified structural plane caused by stratified backfill will reduce the strength of backfill, and the introduction of retarder will make up for the defect. Three retarders, sodium tripoly-phosphate, citric acid and sucrose, were introduced. After determining the optimal dosage of retarder, they were added into the filling slurry with a ratio of lime to sand of 1:6 and a mass concentration of 75%. Based on the hydration reaction mechanism and damage mechanics theory of cement, the setting time test and uniaxial compressive strength test were carried out. With the help of scanning electron microscopy and X-ray diffraction, the influence mechanism of retarder on the physical characteristics of stratified cemented filling was investigated.The main research contents and achievements are as follows:. The results showed that the three retarding agents can delay the setting time of the cement filling slurry, and the retarding effect is sucrose > citric acid > sodium tripolyphosphate. The addition of retarder can improve the uniaxial compressive strength and integrity of stratified consolidated backfill, and the best filling interval time (FIT) is 12 h. Appropriate addition of retarder will increase the amount of cement hydration products, make the structure of hydration products more dense, reduce the formation of stratified structural plane, and help to improve the strength of stratified cemented backfill.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
