Abstract
Serial Synchrotron Crystallography (SSX) is rapidly emerging as a promising technique for collecting data for time-resolved structural studies or for performing room temperature micro-crystallography measurements using micro-focused beamlines. SSX is often performed using high frame rate detectors in combination with continuous sample scanning or high-viscosity or liquid jet injectors. When performed using ultra-bright X-ray Free Electron Laser (XFEL) sources serial crystallography typically involves a process known as ’diffract-and-destroy’ where each crystal is measured just once before it is destroyed by the intense XFEL pulse. In SSX, however, particularly when using high-viscosity injectors (HVIs) such as Lipidico, the crystal can be intercepted multiple times by the X-ray beam prior to exiting the interaction region. This has a number of important consequences for SSX including whether these multiple-hits can be incorporated into the data analysis or whether they need to be excluded due to the potential impact of radiation damage. Here, we investigate the occurrence and characteristics of multiple hits on single crystals using SSX with lipidico. SSX data are collected from crystals as they tumble within a high viscous stream of silicone grease flowing through a micro-focused X-ray beam. We confirmed that, using the Eiger 16M, we are able to collect up to 42 frames of data from the same single crystal prior to it leaving the X-ray interaction region. The frequency and occurrence of multiple hits may be controlled by varying the sample flow rate and X-ray beam size. Calculations of the absorbed dose confirm that these crystals are likely to undergo radiation damage but that nonetheless incorporating multiple hits into damage-free data should lead to a significant reduction in the number of crystals required for structural analysis when compared to just looking at a single diffraction pattern from each crystal.
Highlights
Introduction nal affiliationsSynchrotron-based crystallography is currently undergoing rapid development, in part driven by advances in serial femtosecond crystallography (SFX) at the X-ray Free Electron Laser (XFEL)
Setting this as a lower limit on the crystal size in the beam and using the convolution of the crystal and X-ray beam to determine the total possible interaction region, we find that the expected number of multiple hits varies between 6.3 and 6.5 hits/crystal for 0◦ and at 45◦ crystal tilts, respectively
Since these SSX measurements were conducted at room temperature, particular consideration had to be given to the effects of radiation damage
Summary
Introduction nal affiliationsSynchrotron-based crystallography is currently undergoing rapid development, in part driven by advances in serial femtosecond crystallography (SFX) at the XFEL. Whilst the conventional approach of measuring individual diffraction patterns from a single cryo-frozen crystal is still the most common method of structure determination, the use of SSX, for time-resolved serial crystallography (TR-SX), is growing rapidly [1,2]. This has been one of the driving motivations behind the development of methods for studying molecular dynamics in crystals at room temperature using synchrotron X-rays. Whilst serial crystallography has largely been developed at XFELs [3,4,5,6,7,8,9], several synchrotron facilities around the world are beginning to implement their own setups for performing
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
