Analysis of flow heat transfer characteristics of helium-xenon gas mixtures during natural circulation

Abstract

Helium-xenon(He-Xe) gas mixture is a commonly used cooling medium in fourth-generation advanced reactor systems. The thermal conductivity of a passive waste heat system is related to the safety and reliability of the reactor system. Therefore, it is crucial to explore the passive characteristics of the helium-xenon gas mixture. The passive waste heat removal characteristics of a helium-xenon gas mixture are influenced by the flow and heat transfer characteristics of the mixture. However, existing research on the flow and heat transfer characteristics of helium-xenon gas mixture mainly focuses on single tube bundles and plate bundles with fixed flow rates and high Reynolds numbers. However, existing research on the flow and heat transfer characteristics of the He-Xe mixtures mainly focuses on single tube bundles and plate bundles with fixed flow rates and high Reynolds numbers, and most empirical formulas apply to Reynolds numbers greater than 10000. However, the natural circulation flow rate under the influence of gravity varies with the variation of heating power, and in most operating conditions, the Reynolds number is less than 10000. Due to the lack of research on the convective heat transfer characteristics of the He-Xe mixtures at low Re, this paper investigates the flow and heat transfer characteristics of the He-Xe under natural circulation conditions. A three-dimensional model of the natural circulation circuit was established using numerical calculation methods. Comparing the numerical simulation results of natural air circulation with empirical formulas, it was found that the error was less than 20 %. This proves that the SST k-ω turbulence model can be used to study the flow and heat transfer characteristics of He-Xe gas mixtures in natural circulation. On this basis, natural cycle numerical simulations of He-Xe mixtures with different mixing ratios were carried out at a heat flux of 5000 W/m2, as well as natural cycle numerical simulations of 40 g/mol He-Xe gas mixture at different heating powers, to study the effects of heating power and He-Xe mixing ratio on the natural cycle heat transfer characteristics of the He-Xe gas mixture. The existing He-Xe gas mixture flow heat transfer equation was modified, and the error of the modified Nu empirical equation was less than 12 %, which can be used for the development of the passive waste heat export system program for subsequent He-Xe gas-cooled fast reactors.