Abstract
Abstract Burnishing is a cold processing process that produces a good quality of the surface by the planetary motion of rolls hardened on turned or perforated surfaces. The result is a mirror surface with high wear and corrosion resistance, the surface of the part depends on several factors such as: ductility of the material, tensile strength, roughness of the workpiece surface before rolling, diameter and shape of the rollers (https://sinotech.com/resources/). Burnishing is the most suitable process to improve the fatigue resistance of dynamically requested parts. Because cold rolling does not remove material, then only the surface roughness rolls, influences the obtained roughness. That is why the roughness of the rolls will be equal to the roughness of the part. The cold rolling finishing method does not require the use of special machines, they can be used existing machines in the production sections such as: milling machines, lathes, drilling machines, lathes with numerical control (https://en.wikipedia.org/wiki/).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Bulletin of the Polytechnic Institute of Iași. Machine constructions Section
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
