Analysis of driving forces of 3D knitted shape memory textile actuators using scale-up finite element method

Abstract

The shape memory textile actuator uses a shape memory alloy that changes its crystal structure according to temperature and then returns to its initial shape, which is suitable for wearable applications that value wearing and portability. The shape memory effect of returning to the initial shape and the complex fabric structure influence each other, and accordingly, various drives have been measured in many studies. Therefore, in this study, the driving force, which is the most important physical property of the shape memory textile actuator, was analyzed through a scale-up finite element analysis. In the wire scale, a shape memory alloy wire was obtained for an analysis of the mechanical and thermal properties through tensile tests and DSC, and in the unit cell scale, a 3D knit structure was modeled using the Texgen and Weftknit programs. Finally, a supercell of size 5 × 5 was subjected to external deformation by displacement and heating conditions using disposition through the ANSYS program. The driving force was measured through microanalysis. Subsequently, the driving force of the manufactured shape memory textile actuator was compared and analyzed to determine the suitability of this method. Furthermore, the direction of subsequent studies was mapped based on the analysis presented on the differences in the maximum driving force and error rate.