Abstract
<p class="Abstract">Earthquakes frequently occur in Indonesia because it is an earthquake-prone area. Due to lateral load from an earthquake can cause a weakly constructed building to collapse. Designers often only consider tall buildings in designing earthquake-resistant building structures but ignore earthquake-resistant designing for low-rise buildings. This study focuses on the analysis of earthquake resistant structures with a case study of low-rise buildings in the form of a 3-story reinforced concrete (RC) building in the South Jakarta area. The objective of the study is to analyze the base shear and story drift of the structure due to lateral or earthquake loads. The structure is a reinforced concrete with the concrete compressive strength of <em> </em>= 30 MPa and longitudinal reinforcement of = 420 MPa and stirrups of = 280 MPa. This study uses equivalent static analysis manually and using ETABS 20.1.0 application. The results showed that three story buildings analyzed using equivalent static analysis method and using ETABS 20.1.0 application had almost the same results on horizontal forces with manual result of 1680.97 kN and ETABS of 1648.46 kN. The elastic story deflection and inelastic story drift in this study are still within safe limits because it is below the drift limit.</p>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.