Abstract
Mold surface temperature has a strong effect on the amount of molecular orientation and morphology developed in a non‐isothermal flowing polymer melt. In this work, a well‐characterized isotactic polypropylene was injected in a rectangular mold cavity asymmetrically conditioned by a thin electric heater specifically designed. The cavity surface was heated at temperatures ranging from 80 to 160°C for different times (0.5, 8, and 18 s) after the first contact with the polymer. Asymmetrical thermal conditions have a strong influence on the melt flow, by changing its distribution along the cavity thickness, and final part deformation. The morphology distribution of the molded samples was found strongly asymmetric with complex and peculiar features. Optical and Electron microscopy confirmed the complete reorganization of the crystalline structures along the sample thickness. X‐rays analysis reveals that molecular orientation of the sample surface decreases with the mold temperature and the heating time. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2699–2712, 2016
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
