Abstract
This paper presents a grid-connected PV system in a centralized configuration constructed through a three-phase dual-stage inverter. For the DC-DC stage the three-phase series resonant converter is chosen thanks to the advantages that it exhibits. However, it is inadequate for the accomplishment of MPPT, due to its efficiency strongly depending on the implemented deadtime and switching frequency. Then, this paper proposes a conceptual modification, that is, a modified dual-stage inverter in which the inverter stage is responsible for both the MPPT and the grid-current control. In addition, the DC-DC converter operates with constant duty cycle and frequency. Such configuration requires a new concept, introduced as Behavior Matching. It serves as a fundamental feature for the DC-DC converter to reproduce the PV array I–V characteristic when they are connected, without control action. The maximum power operating point is found by maximizing the direct axis current, obtained by Park's transformation from the inverter, through the perturbation and observation algorithm. Any specific measurement to realize the MPPT is needed. The galvanic isolation is achieved by using a high-frequency transformer. The structure is appropriate for high power applications, above 10 kW.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
