Analysis of a Film Forming Process through Coupled Image Correlation and Infrared Thermography.

Abstract

The aim of the present investigation was to determine the dependence of the material and process parameters of the bending process of thermoplastic films. In this context, parameter combinations leading to high resulting forming ratios were identified. To measure the relevant parameters within the hot bending process, a coupled evaluation of infrared thermography (IRT) and deformation measurement using digital image correlation (DIC) was performed. The coupled measurement enables the identification of the actual mechanically stressed bending area of the film as a result of the bending process. This allows for the specification of the local forming temperatures required for the desired forming ratios. Furthermore, the mechanical and thermal strain along the defined measuring sections and their deviation in individual tests as well as the effect of thermal strain on process control on a larger scale were determined. Based on the results, a process window was defined for the film materials investigated, which will serve as a starting point for future efforts to develop a continuous manufacturing process.