Abstract

Production of charcoal as an alte r native fuel have been growth as the solution of the national problem about decreasing energy source from petroleum. Production of charcoal ha s a useful side product in the form of liquid smoke. The liquid smoke can be used as food preservative in the high grade of liquid smoke and the low grade liquid smoke can be used as wood preservative form termite. The conven t ional process on production liquid smoke it was using redistil l ation the raw liquid smoke f r om direct condensation. This process was consumed lot of energy. Liquid smoke consist of some components which had different boiling point. The aim of this research was to study the influence in using different combination of vertical condensor at the condensation of liquid smoke process f r o the making coconut shell charcoal. This research was done by make some coconut shell charcoal and the smoke which was formed was flown passed some condensors . The result of this research shown that condensation of liquid smoke in the vertical condenser occured a contact between condensation down flow and the vapour. The temperature of the condensation taking point can be adjust by adjusting heat transfer area of the vertical condenser. The tar can be taken at the temperature above 100 0 C. The colour of the liquid smoke was lighter with the lower temperature.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.