Abstract
The direct conversion of methanol into methane is the main process in anaerobic treatment of methanol containing wastewater. However, acetic acid can also be produced from methanol theoretically, which may probably result in an abrupt pH drop and deteriorate the anaerobic process. Therefore, it is interesting to know what would really happen in an anaerobic reactor treating methanol wastewater. In this study, an up-flow anaerobic sludge bed (UASB) reactor treating methanol wastewater was operated. The chemical oxygen demand (COD), acetic acid and pH of the effluent were monitored at different loadings and influent alkalinity. The results showed that the anaerobic reactor could be operated steadily at as low as 119 mg/L of influent alkalinity and high organic loading rate with no obvious pH drops. Volatile fatty acids accumulation was not observed even at strong shock loadings. The microorganisms in the sludge at the end of the test became homogeneous in morphology, which were mainly spherical or spheroidal in shape.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Frontiers of Environmental Science & Engineering in China
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
