Anaerobic granular sludge for simultaneous biomethanation of synthetic wastewater and CO with focus on the identification of CO-converting microorganisms

Abstract

CO is a main component of syngas, which can be produced from the gasification of organic wastes and biomass. CO can be converted to methane by anaerobic digestion (AD), however, it is still challenging due to its toxicity to microorganisms and limited knowledge about CO converting microorganisms. In the present study, anaerobic granular sludge (AGS) was used for the simultaneous biomethanation of wastewater and CO. Batch experiments showed that AGS tolerated CO partial pressure as high as 0.5 atm without affecting its ability for synthetic wastewater degradation, which had higher tolerance of CO compared to suspended sludge (less than 0.25 atm) as previously reported. Continuous experiments in upflow anaerobic sludge blanket (UASB) reactors showed AGS could efficiently convert synthetic wastewater and CO into methane by applying gas-recirculation. The addition of CO to UASB reactor enhanced the hydrogenotrophic CO-oxidizing pathway, resulted in the increase of extracellular polymeric substances, changed the morphology of AGS and significantly altered the microbial community compositions of AGS. The microbial species relating with CO conversion and their functions were revealed by metagenomic analysis. It showed that 23 of the 70 reconstructed genome bins (GBs), most of which were not previously characterized at genomic level, were enriched and contained genes involved in CO conversion upon CO addition. CO-converting microorganisms might be taxonomically more diverse than previously known and have multi-functions in the AD process. The reductive tricarboxylic acid (TCA) cycle in combination with the oxidation of the CO was probably crucial for CO utilization by the majority of the GBs in the present study.