Abstract
In this paper, a 4-bit digital step attenuator using 0.25 μm GaN HEMT technology for wideband radar systems is presented. A switched-path attenuator topology with resistive T-type attenuators and double-pole double-throw (DPDT) switches was used to achieve both low insertion loss and phase/amplitude error. The measured insertion loss of the reference state is 2.8–8.3 dB at DC-12 GHz. The input and output return loss are less than 12 dB at DC-12 GHz. An attenuation coverage of 30 dB with a least significant bit of 2 dB was achieved at DC-12 GHz. A root mean square (RMS) amplitude error of 1 dB and a phase error of 8.5° were achieved, respectively. The attenuator chip size is 2.45 mm × 1.75 mm including pads. To the best of the authors’ knowledge, this is the first demonstration of a GaN-based digital step attenuator.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
