Abstract
An output-capacitorless low-dropout regulator (LDO) with a direct voltage-spike detection circuit is presented in this paper. The proposed voltage-spike detection is based on capacitive coupling. The detection circuit makes use of the rapid transient voltage at the LDO output to increase the bias current momentarily. Hence, the transient response of the LDO is significantly enhanced due to the improvement of the slew rate at the gate of the power transistor. The proposed voltage-spike detection circuit is applied to an output-capacitorless LDO implemented in a standard 0.35-?m CMOS technology (where VTHN ? 0.5 V and VTHP ? -0.65 V). Experimental results show that the LDO consumes 19 ?A only. It regulates the output at 0.8 V from a 1-V supply, with dropout voltage of 200 mV at the maximum output current of 66.7 mA. The voltage spike and the recovery time of the LDO with the proposed voltage-spike detection circuit are reduced to about 70 mV and 3 ?s, respectively, whereas they are more than 420 mV and 30 ?s for the LDO without the proposed detection circuit.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
