Abstract
This work proposes a vertical gallium nitride (GaN) parallel split gate trench MOSFET (PSGT-MOSFET) device architecture suitable for power conversion applications. Wherein two parallel gates, and a field plate are introduced vertically on the sidewalls and connected, respectively, to the gate and source. Technology computer-aided design (TCAD) simulator was used in the design process to achieve a specific on-resistance as low as 0.79 mΩ.cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> for the device, which has the capacity of blocking voltages up to 600 V. The peak electric field of the PSGT-MOSFET could well be lowered to 2.95 MV/cm, which is about 17% lower than that of a conventional trench gate MOSFET (TG-MOSFET) near the trench corner with help of suitable design and optimization of trench depth, drift doping, and field plate thickness. The TCAD simulation shows that the higher drift doping on the device performance of PSGT-MOSFET produces ~2× lower switching losses when compared with a similarly rated conventional TG-MOSFET device.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
