Abstract
When applied to blisk blade profile polishing of aero-engines, "five-axis NC + flexible grinding head + elastic grindstone" polishing technological equipment has advantages of high precision, minor interference, favorable adaptivity, etc. In order to improve the polishing quality and polishing efficiency, a mathematical calculation formula of polishing efficiency was established according to the polishing principles of elastic grindstone (sanding wheel). The optimized combination of technological parameters (ω = 6000 r/min, ap = 0.9 mm, vf = 320 mm/min) was obtained through the range method of orthogonal test results with double optimization objectives-surface roughness and polishing efficiency. Based on the relationship between number of polishing times and surface roughness, a technological program was put forward, that is, polishing is firstly conducted using 320# sanding wheel for 6 times and then 400# sanding wheel for 9 times (totally 15 times) under the optimized combination of technological parameters, then surface roughness less 0.4 μm can be achieved. Blade polishing test results indicate that: efficiency-optimized technological parameters can not only significantly shorten polishing time but also acquire qualified blade surface roughness less 0.4 μm, thus verifying reliability of the optimization method and results.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
