Abstract
An online field verification method of road vehicle speed meters used for traffic speeding enforcement is proposed in this paper, and an off-board reference facility for the proposed online field verification method based on 3D tracking radar is developed. The principle of the online field verification method and the design requirement of the off-board reference facility are firstly introduced. Then the working principles of speed, distance and angle measurement used in the off-board reference facility based on 3D tracking radar are analyzed, and the traceability of speed measurement of the off-board reference facility is described. Finally, the full-range speed calibration and uncertainty evaluation in the laboratory are carried out. The speed calibration results show that the speed measurement errors of the off-board reference facility are within ±0.5 km/h at the speed value in the range of (10~100) km/h and ±0.5 % at the speed value in the range of (100~300) km/h, which can satisfy the requirement for the online field verification of road vehicle speed meters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.