Abstract
A study investigating the effects of titanium (Ti) atoms sputtered from different sources on substrate distance was attempted in order to effectively dope a reduced graphene oxide (rGO) thin film surface. Factors such as crystallinity, morphology, phase formation, light absorption, and surface chemical state of rGO-TiO2 were investigated. As a result, functional groups or chemical states revealed the presence of Ti-O-C in rGO-TiO2 nanocomposite after the sputtering process. The titanium source from the target was of Ti3+ species as determined using X-ray photoelectron spectroscopy (XPS). It was found that average sized Ti3+ ions of around 59.4 nm were incorporated into the rGO nanosheet. A customized Dye-Sensitized Solar Cells (DSSCs) device was fabricated with the photo-anode consisting of sputtered rGO-TiO2 nanocomposite. After optimization, the Ti target allocated with 10 cm-apart FTO glass-coated rGO nanosheet and 0.67 cm2 active area exhibited an ideal PCE of 6.60%, which is remarkably higher than the usual 5 cm sputtering distance the sample (1.90%) had achieved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
