An investigation of electrical and structural properties of Ni-germanosilicided Schottky diode

Abstract

Ni-germanosilicided Schottky barrier diode has been fabricated by annealing the deposited Ni film on strained-Si and characterized electrically in the temperature range of 125 K–300 K. The chemical phases and morphology of the germanosilicided films were studied by using scanning electron microscopy (SEM), cross-sectional transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). The Schottky barrier height ( ϕ b), ideality factor ( n) and interface state density ( D it) have been determined from the current–voltage ( I– V) and capacitance–voltage ( C– V) characteristics. The current–voltage characteristics have also been simulated using SEMICAD device simulator to model the Schottky junction. An interfacial layer and a series resistance were included in the diode model to achieve a better agreement with the experimental data. It has been found that the barrier height values extracted from the I– V and C– V characteristics are different, indicating the existence of an in-homogeneous Schottky interface. Results are also compared with bulk-Si Schottky diode processed in the same run. The variation of electrical properties between the strained- and bulk-Si Schottky diodes has been attributed to the presence of out-diffused Ge at the interface.