Abstract
This paper presents a seismic retrofit of an industrial-type precast reinforced concrete building structure using friction dampers. The project consisted of retrofitting two precast reinforced concrete buildings, one of which will be presented in this paper. Precast concrete is one of the industrial structures' most preferred construction methods due to its low cost, fast construction, and availability in rural areas. Unfortunately, most structures constructed before “Specification for Buildings to be Built in Seismic Zones(TBDY 2018)[5]” are not sufficiently engineered and are expected to perform poorly when exposed to a significant seismic event. The general characteristic of precast reinforced concrete buildings built before TBDY 2018 is their relatively high concrete quality (compared to cast-in-place reinforced concrete buildings) and better reinforcement workmanship. But they have some characteristic weaknesses as well. Weak beam-column connections, high drift ratios due to heavy beams, instability problems, and lack of frame behavior can be considered primary weaknesses. General classical retrofitting techniques include increasing beam/column sections or adding new reinforced concrete or steel members to the system or FRP(fiber-reinforced polymer) wrapping. Mostly classical retrofitting needs additional foundations. All these techniques require a long construction period, causing evacuation and stopping building usage. Because stopping the production cost can be tolerated by the owners, a retrofitting approach that can be assembled during the normal function of the industrial structures is required. As a result of this requirement, friction dampers are selected as the supplemental energy dissipation device. ASCE 41-17 [10] is employed for the building's damper design and performance evaluation. Before the damper study, some instability and weak connection problems are solved by traditional strengthening measures. The most effective damper configuration and capacities are selected after an iterative trial-and-error linear study using the simplified methods developed by PROMER. Nonlinear push-over analyses are conducted after linear prestudies. Finally, a nonlinear time-history analysis is performed for confirmation of the results. , It is shown that the proposed retrofit scheme satisfies the desired performance goals for both DBE and MCE events. Overall, it is considered that the proposed retrofit scheme with dampers provides the optimal solution for the Project stakeholders from a performance, design, constructability, and economic point of view. Some application photos will be presented, and methods will be explained in detail in the paper. The friction damper behavior is based on the rotational friction hinge concept. The dampers increase building damping, causing a decrease in earthquake demand. As a result, dampers provide passive energy dissipation and protect buildings from structural and nonstructural damage during moderate and severe earthquakes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Academic Platform Journal of Natural Hazards and Disaster Management
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.