An innovative experimental device for characterizing the responses of monopiles subjected to complex lateral loading

Abstract

Offshore wind turbines are usually founded on monopiles. During the operation period, the structure is subjected to complex lateral loading from wind, wave and current. The soils surrounding those monopiles may deform with increasing the number of loading cycles, leading to tilting of the whole structure; hence, it is vital to carry out physical model tests to examine the long-term performance of monopiles. This study proposes an innovative experimental setup for centrifuge modelling of the response of monopiles under complex lateral loading. Hydraulic actuators are adopted to apply lateral loads on model pile, and electrohydraulic servo-valves and associated controllers are used to achieve a closed loop position or load control. A carefully designed spherical hinge and load bars are used to connect the model pile and actuator shafts. This enables that the pile can rotate freely and can move vertically freely. A centrifuge test on a winged monopole subjected to perpendicular lateral loading was carried out at 100g. The experimental results shed light on pile responses in the cyclic loading and constant loading directions.