Abstract

AbstractSimple, inexpensive, and rugged reference electrodes are essential for field applications. The objective of this study was to develop an inexpensive, field‐worthy reference electrode. The electrode developed consists of a silver wire coated with AgCl held in a small glass tube filled with 4 M KCl gelled with agar. The glass tube assembly is fitted inside a larger polyvinyl chloride (PVC) tube filled with gelled (NH4)2SO4 solution and capped with a fritted soil‐contacting membrane. The millivolt output compared well (R2 = 0.999) with predicted values and values from commercial reference electrodes when paired with pH and nitratesensing electrodes. Comparisons of commercial and fabricated electrodes in two soils showed that the outputs were statistically the same, and that they were operational within a moisture range from saturation to 0.7 to 0/1 kg kg−1, depending on the soil texture. The fabricated electrodes are low cost, rugged, and stable for months when kept wet.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.