Abstract
A new technique with a simple apparatus is introduced in observing and measuring the diameter of hair directly on cross section.About 10 hairs are arranged in parallel in place of the film of a slidef rame of cardboard; about 10 holes are made both on the upper and lower edges of the opening of the slide-frame, through which holes the hairs are fixed for easy manipulation's sake.A 10 percent celloidin solution is poured to fill the opening of the slide-frame so that the hairs sink in the solution. In about 1.5 hours there is produced a hardened celloidin with the hairs embedded in it; the hardened celloidin is removed from the slide-frame. The hardened celloidin is sectioned to make a right angle to the arranged hairs. The section thus obtained is adequately placed under a microscope and observed by a reflected light instead of a penetrating light.During the process a special holder consisting of a pair of wood is employed to secure the section placed under the microscope.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.