An Improved Short-Beam Method for Measuring Multiple Constitutive Properties for Composites

Abstract

Abstract The short beam shear (SBS) test method combined with digital image correlation (DIC) deformation measurement is used in this work to study constitutive properties of the IM7/8552 carbon/epoxy composite material system. Dependence of the shear stress approximation on the SBS specimen span-to-thickness (s/t) ratio has been investigated. A stress model developed in a previous study is expanded to account for this dependency. In addition, the effect of nonzero transverse normal stresses on a simple closed-form approximation for tensile and compressive axial moduli has been assessed. Results from the expanded closed-form solution verify that transverse normal stress has little influence on the measurement of the axial moduli. Also, the SBS test setup has been refined as a result of the sensitivity of the measured axial strain distribution to the specimen alignment in the test fixture. The test results obtained in this work are compared with previously published results to demonstrate the ability of a single unidirectional SBS test to capture multiple constitutive properties including axial tensile and compressive moduli, the nonlinear shear stress–strain response in the plane of loading, and to show that measured material properties do not depend on the test specimen size.