Abstract
To enhance the performance for high-speed tracking control of a piezoelectric tube actuator (PTA), an improved direct inverse rate-dependent PI model is obtained in this paper, and then adopted to design a practical feedforward controller achieving high-speed tracking control for a high-frequency trajectory with strong robustness. Specifically, based on the Prandtl-Ishlinskii (PI) model, an improved direct rate-dependent inverse model is set up for the PTA, with a polynomial function module introduced to eliminate the influence caused by the structure nonlinearity. Then, considering the features of the PTA structure, some preprocessing procedure is proposed to handle the collected experimental data, with the results utilized to identify all the unknown parameters over a wide bandwidth. Based on the obtained model, a practical feedforward controller, which presents the advantages of high-speed response, simple structure and convenient implementation, is then designed to enable the PTA to track high-frequency trajectories with satisfactory precision. Some experimental results are provided, which clearly demonstrate the high precision of the constructed/identified model, and the satisfactory performance of the proposed practical feedforward tracking control law.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.