Abstract
We have constructed a nanosecond pulsed Xe lamp which is controllable by a small-sized, high-voltage semiconductor switch that is driven by a transistor-transistor-logic level external signal. The Xe lamp used here is commercially available and it is usually operated in a direct-current (dc) mode. The aim of the external control is to solve a discharge difficulty in a free-running Xe lamp that we have developed previously. The problem is that the free-running discharge Xe lamp suddenly switches in its operation mode from a pulsed spark-discharge mode to an undesirable, weak, dc arc-discharge mode. The pulse width of emitted light from the pulsed Xe lamp was 3.8 ns and the repetition frequency was 0.5–1 kHz with a peak power 100 W. In order to obtain an accurate timing signal required for a fluorescence-lifetime measurement system, a current probe circuit was added in the control circuit. Details of the lamp and the results of fundamental performance tests are shown.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
