An experimental study on in-cylinder soot formation and flame oscillation of renewable fuel blends in an optical engine

Abstract

Methanol has been widely recognized as a promising alternative fuel for mitigating greenhouse gas emissions. However, its application in internal combustion engines often necessitates blending with a high-reactivity fuel to address challenges related to ignitability and combustion stability. In this study, a two-color method was employed in a single-cylinder optical engine to investigate the characteristics of soot formation and flame oscillation of methanol blended with a high-reactivity fuel, hydrogenated catalytic biodiesel (HCB), under partially premixed combustion (PPC) modes. The blended fuels include M15 (15% methanol, 60% HCB, and 25% n-octanol) and M25 (25% methanol, 60% HCB, and 25% n-octanol), with pure hydrogenated catalytic biodiesel M0 (100% HCB) serving as the reference fuel. N-octanol was utilized as the co-solvent to enhance the stability of the mixture. The results indicate that, employing double-injection strategies, as the methanol content increases in the blended composition, leading to a postponed peak cylinder pressure and heat release rate during combustion. Thanks to the high-level premixed combustion and higher oxygen content, the increases of alcohol blending significantly reduced in-cylinder soot formation. Double-injection strategies reduced soot production effectively and resulted in a more uniform soot distribution compared to single-injection strategies. In terms of flame oscillation, its amplitude primarily correlates with the rate of cylinder pressure rise, while the methanol content within the blends exerts a minor impact on flame oscillation. Double-injection strategies contributes to a more uniform fuel distribution, ensuring a smoother heat release process and significantly reducing flame oscillation amplitudes compared to single-injection strategies.