An experimental study on droplet quench and steam explosion in boric acid solutions

Abstract

Boric acid (H3BO3) is widely adopted as an additive in the coolant of light water reactors for reactivity control, but its effect on fuel coolant interactions (FCI) during severe accidents (especially on steam explosion) was rarely investigated. To examine the effect of the boric acid additive in coolant on steam explosion, a series of molten droplet-coolant interaction tests using H3BO3 solutions (with concentration ranging from 0–3.2% by weight) is carried out in the present study. The characteristics of melt-coolant interactions are the occurrence probability of typical phenomena (no fragmentation, minor fragmentation, or spontaneous steam explosion), lateral deformation ratio, quench depth, pressure impulse and debris particle size distribution. The statistical data of such characteristics are obtained through repeating 20 runs of the same test category. The experimental results show that the H3BO3 addition in coolant has various impacts on the above-mentioned characteristics of melt-coolant interactions, depending on the H3BO3 concentration. In particular, the probability of steam explosion sightly decreases as the H3BO3 concentration increases from zero to 1.2 wt.%, but significantly increases as the H3BO3 concentration further increases to 3.2 wt.% trough 2.2 wt.%. Namely, the inhibiting effect of boric acid on steam explosion is diminishing with increasing H3BO3 concentration beyond 1.2 wt.%. It is also found that both melt and coolant temperatures are crucial parameters impacting the likelihood and energetics of steam explosion.