Abstract
An investigation of self-excited combustion instabilities in a RP-3 fueled, multi-swirl stabilized, lean direct injection (LDI) combustor was performed and investigated with different operating conditions (inlet Reynolds number and fuel–air ratio (FAR)). Pressure fluctuation and heat release data were simultaneously collected using a 3-channel synchronous acquisition system. The results show that as the FAR increases, combustion transitions from a low oscillation mode to a high oscillation mode. During the modal transition, the oscillating flame structure, formed by vortex shedding in the shear layer and the recirculation zone, is then transformed into contraction and expansion movements from the front of the central recirculation zone towards the downstream and radial directions of the combustor. When combustion is in a low oscillation mode, the driving capability of the flame is relatively low. Upon entering a high oscillation mode, the overall driving energy of the flame can maintain combustion in a limit cycle oscillation state.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
