Abstract
Many hazards encountered during coal mining can be caused by the instability and failure of the composite structure of the coal seam and the surrounding rock strata. The defects present in the coal affect the structural stability of the composite structure. In this study, uniaxial compression tests were conducted on sandstone‐coal composite samples with pre‐existing cracks in the coal, combined with tests performed with an acoustic emission (AE) device and a digital video camera. The strength, macrofailure initiation (MFI), and failure characteristics of composite samples, as influenced by the coal’s pre‐existing cracks, were analysed. The coal’s pre‐existing cracks were shown to reduce the strength, promote the occurrence of MFI, and affect the failure characteristics of the samples. Vertical penetration cracks had much more pronounced effects on strength and MFI occurrence, especially vertical penetration cracks that penetrated through the centre of the coal. Horizontal penetration cracks had a much reduced effect on strength and MFI occurrence. The MFI caused a step shape in the stress‐strain curve accompanied with a peak energy index signal and occurred around the original coal cracks. The MFI models predominantly exhibited crack initiation from the pre‐existing coal cracks and surface spalling caused by crack propagation. The intact composite sample failure presented as an instantaneous failure, whereas the composite samples containing the pre‐existing cracks showed a progressive failure. The failures of composite samples occurred predominantly within the coal and displayed an X‐typed shear failure accompanied by a small splitting failure. Both the coal and sandstone were destroyed in the composite sample with vertical penetration cracks through the centre of the coal. Failure of the coal occurred through a splitting failure accompanied by a small X‐typed shear failure, while the sandstone showed a splitting failure induced by crack propagation in the coal.
Highlights
Many hazards encountered during coal mining can be caused by the instability and failure of the composite structure of the coal seam and the surrounding rock strata. e defects present in the coal affect the structural stability of the composite structure
Vertical penetration cracks had much more pronounced effects on strength and macrofailure initiation (MFI) occurrence, especially vertical penetration cracks that penetrated through the centre of the coal
Horizontal penetration cracks had a much reduced effect on strength and MFI occurrence. e MFI caused a step shape in the stress-strain curve accompanied with a peak energy index signal and occurred around the original coal cracks. e MFI models predominantly exhibited crack initiation from the pre-existing coal cracks and surface spalling caused by crack propagation. e intact composite sample failure presented as an instantaneous failure, whereas the composite samples containing the pre-existing cracks showed a progressive failure. e failures of composite samples occurred predominantly within the coal and displayed an X-typed shear failure accompanied by a small splitting failure
Summary
Many hazards encountered during coal mining can be caused by the instability and failure of the composite structure of the coal seam and the surrounding rock strata. e defects present in the coal affect the structural stability of the composite structure. E strength, macrofailure initiation (MFI), and failure characteristics of composite samples, as influenced by the coal’s pre-existing cracks, were analysed. E coal’s pre-existing cracks were shown to reduce the strength, promote the occurrence of MFI, and affect the failure characteristics of the samples. E failures of composite samples occurred predominantly within the coal and displayed an X-typed shear failure accompanied by a small splitting failure Both the coal and sandstone were destroyed in the composite sample with vertical penetration cracks through the centre of the coal. E effects of loading rates on the strength, failure, and acoustic emission (AE) characteristics of a rock-coal-rock composite sample and a rockcoal composite sample under uniaxial loading and cyclic loading and unloading were studied by Huang and Liu [1] and Chen et al [13], respectively. Wang et al studied the sliding mechanism of a composite sample [20]
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
