An Empirical Spatiotemporal Input Model for Regional Seismic Ground Motions

Abstract

The development of the economy and technology has attracted greater attention to regional seismic resistance, a key technology for which is the simulation of regional seismic ground motions. This study proposes a simple and highly operable method for the generation of regional seismic ground motions, which includes five steps. First, a seismic ground motion recorded at a seismic station is selected as the original ground motion. The original ground motion is then decomposed into eight sub-signals by wavelet packet transform (WPT). Next, the eight sub-signals are adjusted by the frequency attenuation model. The generated ground motion is then amplitude modulated by the peak ground acceleration (PGA) attenuation model. The frequency attenuation model and the PGA attenuation model are obtained by fitting seismic data from the 1999 Chi-Chi earthquake. Finally, the propagation of the ground motion is considered. The proposed method can provide a time history of seismic ground motions for any point in a region. To investigate the rationality and applicability of the proposed method, the characteristics of the generated seismic ground motions are compared with those of true seismic ground motions. The average error of the PGA of the generated ground motions and the true ground motions is 0.072[Formula: see text][Formula: see text]; thus, the proposed method is suitable for use in small-scale regions. Furthermore, 4-story and 15-story structures are used for structural response analysis. The story drift ratio error between the generated ground and true ground motions is found to be within an acceptable error range. The proposed method provides a new way to generate ground motions for regional seismic investigation.