Abstract
Alloy scraps containing plenty of Ni, Cr, Mn, and Fe are promising secondary sources, however, it is still difficult to valorize them due to the high corrosion resistance and mechanical strength and the multi-step processes of separation and purification. Herein, we employed an electrochemical oxidation approach to converting alloys scraps to porous transition metal oxides (TMOs) in highly corrosive molten salts. The resultant TMOs are directly used as feedstocks to synthesize quaternary medium-entropy (FeCrNiMn)3O4 and a series of spinel (FeCrNiMnX)3O4 (X = Zn, Ti, Nb, Sb, Bi, W, and Zr) oxides via solid-state reaction. When employed as anodes for Li-ion batteries (LIBs), the reversible capacity the (FeCrNiMnZn)3O4 reaches 636.4 mAh g−1 at 500 mA g−1 after 250 cycles and the rate capacity reaches 252.4 mAh/g after 2000 cycles at 3 A g−1. The good Li-storage performance is thanks to their excellent electronic conductivity and milder volume change. This work provides a facile route for the direct recovery of full components from alloy scraps and gives insights into the design of HEOs with different elements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.