Abstract
PurposeThis paper aims to present a new trajectory scheduling method to generate a smooth and continuous trajectory for a hybrid machining robot.Design/methodology/approachThe trajectory scheduling method includes two steps. First, a G3 continuity local smoothing approach is proposed to smooth the toolpath. Then, considering the tool/joint motion and geometric error constraints, a jerk-continuous feedrate scheduling method is proposed to generate the trajectory.FindingsThe simulations and experiments are conducted on the hybrid robot TriMule-800. The simulation results demonstrate that this method is effectively applicable to machining trajectory scheduling for various parts and is computationally friendly. Moreover, it improves the robot machining speed and ensures smooth operation under constraints. The results of the S-shaped part machining experiment show that the resulting surface profile error is below 0.12 mm specified in the ISO standard, confirming that the proposed method can ensure the machining accuracy of the hybrid robot.Originality/valueThis paper implements an analytical local toolpath smoothing approach to address the non-high-order continuity problem of the toolpath expressed in G code. Meanwhile, the feedrate scheduling method addresses the segmented paths after local smoothing, achieving smooth and continuous trajectory generation to balance machining accuracy and machining efficiency.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call