An automatic robot for ultrasonic partial discharge detection of gas-insulated switchgear

Abstract

Purpose Gas-insulated switchgear (GIS) stands as a pivotal component in power systems, susceptible to partial discharge occurrences. Nevertheless, manual inspection proves labor-intensive, exhibits a low defect detection rate. Conventional inspection robots face limitations, unable to perform live line measurements or adapt effectively to diverse environmental conditions. This paper aims to introduce a novel solution: the GIS ultrasonic partial discharge detection robot (GBOT), designed to assume the role of substation personnel in inspection tasks. Design/methodology/approach GBOT is a mobile manipulator system divided into three subsystems: autonomous location and navigation, vision-guided and force-controlled manipulator and data detection and analysis. These subsystems collaborate, incorporating simultaneous localization and mapping, path planning, target recognition and signal processing, admittance control. This paper also introduces a path planning method designed to adapt to the substation environment. In addition, a flexible end effector is designed for full contact between the probe and the device. Findings The robot fulfills the requirements for substation GIS inspections. It can conduct efficient and low-cost path planning with narrow passages in the constructed substation map, realizes a sufficiently stable detection contact and perform high defect detection rate. Practical implications The robot mitigates the labor intensity of grid maintenance personnel, enhances inspection efficiency and safety and advances the intelligence and digitization of power equipment maintenance and monitoring. This research also provides valuable insights for the broader application of mobile manipulators in diverse fields. Originality/value The robot is a mobile manipulator system used in GIS detection, offering a viable alternative to grid personnel for equipment inspections. Comparing with the previous robotic systems, this system can work in live electrical detection, demonstrating robust environmental adaptability and superior efficiency.